Installing a Stereo System in Your Boat : Quick Tips

Adding a stereo to a boat can be tricky. Therefore, this blog post will shed light on how to properly install a stereo on your boat.

1 - Mount the Stereo Unit

The stereo unit should be mounted in a central location and not too low. If it is too low, you will have difficulties handling the remote. You will have to bend down, which is a position where you can easily fall. If it is too high, you may miss the volume buttons. The ideal place for the stereo is in the centre of the console.

2 - Protect the System from Water

It is best to protect the stereo unit from water. You can place the unit into a remote-controlled speaker box that is built to protect it from moisture. If you don’t have a speaker box, consider getting a waterproof sleeve. A water-resistant sleeve will keep the unit safe and sound.

3 - Wire the System to Avoid Bad Connections

Before you start wiring the system, you should make sure you have the wiring harness and the connector you need. If you have the wrong connector, you will have to make a trip to the hardware store. Also, make sure that the wiring harness can fit the stereo wiring.

4 - Use Decent Speakers

The best speakers should be placed on the sides of the boat. These speakers should be powered by a stereo system and should have a decent power rating. You should also ensure that the speakers are properly placed so that the volume is boosted.

4 - Use Components That Do Not Corrode

Since you are dealing with a marine environment, you will have to make sure that the components are corrosion-free. Corrosion will destroy the wiring and ruin the speakers. Speak to a specialist to find marine components that will work well with your stereo.

5 - Mount the Speakers

The speakers should be properly mounted. Doing this will prevent them from falling into the water when you are cruising.

6 - Make Sure the Speaker Wire is Covered

The speaker wire should be hidden from the rain. If it is not, the speaker wire will corrode, and the speakers will fall into the water.

7 - Make Sure All Wires Are Connected

Make sure the speaker wire and the power wire are connected to the stereo system. If they are not connected, the speakers will not work.

Conclusion

Installing a stereo on a boat can be tricky, but it is not impossible. The most important thing is to follow the instructions you find online. They will ensure that you do not damage your stereo system as well as the boat. If you follow these instructions, you will be able to install a brand new stereo in your boat with no problems.

Whether you need Bluetooth marine speakers or other equipment to enhance your boating experience, shop at Seachange Boating. We are continuously designing, sourcing and testing products to improve your boating lifestyle. Explore the difference with boatloads of gear from brands such as Mares, Simrad, Camelbak, JL Audio, Purpleline, Phender Pro and our own exclusive line of products.

Leave a comment

You might like

Save $10
Save $10